Iibiyaha Xalka Is-beddelka Isku-habaynta Caalamiga ah

Ku soo dhawoow AYA |Bookmark boggan |Telefoonka rasmiga ah: 0311-6603 1296

bogga_banner

Nuts Flange

Nuts Flange

Nuska Flange waa nooc ka mid ah lowska oo ka muuqda gees ballaaran oo siman oo hal daraf ah.Flange wuxuu bixiyaa dusha sare ee xajinta, qaybinta culeyska iyo yaraynta khatarta dhaawaca dusha sare ee la xiro.

  • Midabka Flange Seerrated Birta Aan Lahayn

    Midabka Flange Seerrated Birta Aan LahaynFaahfaahinShaxda cabbirka

    AYAINOX waxay bixisaa nuts birta seerrated flange nuts qayb ka mid ah lineupka alaabta our, bixinta tayo sare leh xal ku xidhid codsiyada warshadaha kala duwan.AYAINOX seerrated flange nuts ayaa ka muuqda seerations saxan-engineered oo ku yaal dhinaca hoose ee flange-ga, kaas oo siinaya xajin aad u fiican iyo iska caabin dabacsan marka la gariiriyo gariir ama wareeg.
    Waxaan bixinaa kala duwanaansho kala duwan oo cabbirro ah iyo muraayado dun ah si aan u daboolno cabbirrada boodhka ama xargaha kala duwan iyo qeexitaannada, buuxinta baahiyaha mashaariicda iyo codsiyada kala duwan.

    Isku-xidhka Isku-xidhka
    d
    M5 M6 M8 M10 M12 (M14) M16 M20
    P Garoon 0.8 1 1.25 1.5 1.75 2 2 2.5
    c min 1 1.1 1.2 1.5 1.8 2.1 2.4 3
    da max 5.75 6.75 8.75 10.8 13 15.1 17.3 21.6
    min 5 6 8 10 12 14 16 20
    dc max 11.8 14.2 17.9 21.8 26 29.9 34.5 42.8
    dw min 9.8 12.2 15.8 19.6 23.8 27.6 31.9 39.9
    e min 8.79 11.05 14.38 16.64 20.03 23.36 26.75 32.95
    m max 5 6 8 10 12 14 16 20
    min 4.7 5.7 7.64 9.64 11.57 13.3 15.3 18.7
    mw min 2.5 3.1 4.6 5.6 6.8 7.7 8.9 10.7
    s max 8 10 13 15 18 21 24 30
    min 7.78 9.78 12.73 14.73 17.73 20.67 23.67 29.16
    r max 0.3 0.4 0.5 0.6 0.7 0.9 1 1.2
  • Nut Flange Aan Lahayn

    Nut Flange Aan LahaynFaahfaahinShaxda cabbirka

    AYAINOX waxay soo saartaa looska flange-ga birta ah, kuwaas oo ah xidhiyaal khaas ah oo leh flange (qayb ballaadhan, fidsan) oo lagu dhex daray naqshada lawska.Sida caadiga ah waxaa laga sameeyaa alaabta birta ah, sida darajada 304 ama 316 birta daxalka ah, oo bixisa iska caabin daxalka oo aad u wanaagsan.Waxay codsiyo ka helaan warshado kala duwan, oo ay ku jiraan baabuurta, dhismaha, badda, iyo mashiinada.

    Markaad tixgelinayso AYAINOX nuts flange nuts ee mashaariicdaada, waxaad filan kartaa waxqabad la isku halayn karo, adkeysi, iyo kala duwanaansho codsiyo kala duwan oo u baahan xalal adag oo u adkaysta gariirka.

    Magac ahaan
    Cabbirka
    Dhexroorka Weyn ee Aasaasiga ah Balaadhka Guud ahaan Guryaha, F Balaadhka geesaha geesaha, G Dhexroor Flange, B Dhumucda lowska, H Dhererka Wrenching ugu yar, J Dhumucda Flange Ugu Yar, K Dhamaadka ugu badnaan ee dusha sare ee dhidibka xadhigga, FIM
    Min. Max. Min. Max. Min. Max. Min. Max.
    Hex Flange nuts
    No.6 0.1380 0.302 0.312 0.342 0.361 0.406 0.422 0.156 0.171 0.10 0.02 0.014
    8 0.1640 0.334 0.334 0.381 0.397 0.452 0.469 0.187 0.203 0.13 0.02 0.016
    10 0.1900 0.365 0.375 0.416 0.433 0.480 0.500 0.203 0.219 0.13 0.03 0.017
    12 0.2160 0.428 0.438 0.488 0.505 0.574 0.594 0.222 0.236 0.14 0.04 0.020
    1/4 0.2500 0.428 0.438 0.488 0.505 0.574 0.594 0.222 0.236 0.14 0.04 0.020
    5/16 0.3125 0.489 0.500 0.557 0.577 0.660 0.680 0.268 0.283 0.17 0.04 0.023
    3/8 0.3750 0.551 0.562 0.628 0.650 0.728 0.750 0.330 0.347 0.23 0.04 0.025
    7/16 0.4375 0.675 0.688 0.768 0.794 0.910 0.937 0.375 0.395 0.26 0.04 0.032
    1/2 0.5000 0.736 0.750 0.840 0.866 1.000 1.031 0.437 0.458 0.31 0.05 0.035
    9/16 0.5625 0.861 0.875 0.982 1.010 1.155 1.188 0.483 0.506 0.35 0.05 0.040
    5/8 0.6250 0.922 0.938 1.051 1.083 1.248 1.281 0.545 0.569 0.40 0.05 0.044
    3/4 0.7500 1.088 1.125 1.240 1.299 1.460 1.500 0.627 0.675 0.46 0.06 0.051
    Nuts Hex Flange Weyn
    1/4 0.2500 0.428 0.438 0.488 0.505 0.700 0.728 0.281 0.312 0.15 0.04 0.024
    5/16 0.3125 0.489 0.500 0.557 0.577 0.790 0.820 0.343 0.375 0.20 0.04 0.028
    3/8 0.3750 0.551 0.562 0.628 0.650 0.885 0.915 0.390 0.406 0.24 0.04 0.031
    7/16 0.4375 0.675 0.688 0.768 0.794 1.100 1.131 0.437 0.468 0.26 0.04 0.038
    1/2 0.5000 0.736 0.750 0.840 0.866 1.175 1.205 0.485 0.515 0.29 0.06 0.041
    9/16 0.5625 0.861 0.875 0.982 1.010 1.260 1.300 0.546 0.578 0.37 0.06 0.044
    5/8 0.6250 0.922 0.938 1.051 1.083 1.280 1.360 0.600 0.640 0.42 0.06 0.045
  • Nuts Flange Birta Aan Lahayn

    Nuts Flange Birta Aan LahaynFaahfaahinShaxda cabbirka

    Looska flange birta aan-dhalatada lahayn waa xireyaal gaar ah oo leh flange isku dhafan oo hal daraf ah.Flange-gan wuxuu bixiyaa faa'iidooyin dhowr ah, oo ay ku jiraan u qaybinta rarka dusha sare ee weyn, ka hortagga waxyeellada alaabta lagu dhejiyo, iyo u dhaqmidda sidii qalab gudaha ah si loo ilaaliyo dusha sare.

    Xajmiga xadhigga M5 M6 M8 M10 M12 M14 M16 M20
    D
    P Garoon dun aan fiicneyn 0.8 1 1.25 1.5 1.75 2 2 2.5
    Dul wanaagsan 1 / / 1 1.25 1.5 1.5 1.5 1.5
    Dul wanaagsan 2 / / / -1 -1.25 / / /
    c min 1 1.1 1.2 1.5 1.8 2.1 2.4 3
    da min 5 6 8 10 12 14 16 20
    max 5.75 6.75 8.75 10.8 13 15.1 17.3 21.6
    dc max 11.8 14.2 17.9 21.8 26 29.9 34.5 42.8
    dw min 9.8 12.2 15.8 19.6 23.8 27.6 31.9 39.9
    e min 8.79 11.05 14.38 16.64 20.03 23.36 26.75 32.95
    m max 5 6 8 10 12 14 16 20
    min 4.7 5.7 7.6 9.6 11.6 13.3 15.3 18.9
    mw min 2.2 3.1 4.5 5.5 6.7 7.8 9 11.1
    s max=xajmiga magac ahaan 8 10 13 15 18 21 24 30
    min 7.78 9.78 12.73 14.73 17.73 20.67 23.67 29.67
    r max 0.3 0.36 0.48 0.6 0.72 0.88 0.96 1.2