Nut Flange Aan Lahayn

Dulmar:

AYAINOX waxay soo saartaa looska flange-ga birta ah, kuwaas oo ah xidhiyaal khaas ah oo leh flange (qayb ballaadhan, fidsan) oo lagu dhex daray naqshada lawska. Sida caadiga ah waxaa laga sameeyaa alaabta birta ah, sida darajada 304 ama 316 birta daxalka ah, oo bixisa iska caabin daxalka oo aad u wanaagsan. Waxay codsiyo ka helaan warshado kala duwan, oo ay ku jiraan baabuurta, dhismaha, badda, iyo mashiinada.

Markaad tixgelinayso AYAINOX nuts flange nuts ee mashaariicdaada, waxaad filan kartaa waxqabad la isku halayn karo, adkeysi, iyo kala duwanaansho codsiyo kala duwan oo u baahan xalal adag oo u adkaysta gariirka.

Email noogu soo dir

Tilmaamaha

Shaxda cabbirka

Waa maxay sababta AYA

Sharaxaada Alaabta

Magaca Alaabta	Nut Flange Aan Lahayn
Qalab	Waxa laga sameeyay 18-8 bir aan daahin, lawskani waxa ay leeyihiin iska caabin kiimikaad oo wanaagsan waxana laga yaabaa in ay si khafiif ah birlabaysan. Waxa kale oo loo yaqaan A2/A4 birta aan lahayn.
Nooca Qaabka	lowska hex Dhererka waxa ku jira garabka.
Codsiga	Qufulka flange-yadani waxay leeyihiin serations oo xajiya dusha walxaha halkii ay ka ahaan lahaayeen dunta si sahlan loo rakibo iyo iska caabin gariir khafiif ah. Flange wuxuu qaybiyaa cadaadiska halka lowska uu la kulmo dusha walxaha, isaga oo meesha ka saaraya baahida dhaqid gooni ah.
Heerka	Miraha la kulma ASME B18.2.2 ama ISO 4161 (oo hore u ahaan jiray DIN 6923) waxay u hoggaansamaan heerarkan cabbirka.

Kii hore: Midabka Hex Isku-xidhka Aan-La'aanta ah

Xiga: Midabka Flange Seerrated Steel-Aan-La'aanta ah

Magac ahaan Cabbirka	Dhexroorka Weyn ee Aasaasiga ah	Balaadhka Guud ahaan Guryaha, F		Balaadhka geesaha geesaha, G		Dhexroor Flange, B		Dhumucda lowska, H		Dhererka Wrenching ugu yar, J	Dhumucda Flange Ugu Yar, K	Dhamaadka ugu badnaan ee dusha sare ee dhidibka xadhigga, FIM
Magac ahaan Cabbirka	Dhexroorka Weyn ee Aasaasiga ah	Min.	Max.	Min.	Max.	Min.	Max.	Min.	Max.	Dhererka Wrenching ugu yar, J	Dhumucda Flange Ugu Yar, K
Hex Flange nuts
No.6	0.1380	0.302	0.312	0.342	0.361	0.406	0.422	0.156	0.171	0.10	0.02	0.014
8	0.1640	0.334	0.334	0.381	0.397	0.452	0.469	0.187	0.203	0.13	0.02	0.016
10	0.1900	0.365	0.375	0.416	0.433	0.480	0.500	0.203	0.219	0.13	0.03	0.017
12	0.2160	0.428	0.438	0.488	0.505	0.574	0.594	0.222	0.236	0.14	0.04	0.020
1/4	0.2500	0.428	0.438	0.488	0.505	0.574	0.594	0.222	0.236	0.14	0.04	0.020
5/16	0.3125	0.489	0.500	0.557	0.577	0.660	0.680	0.268	0.283	0.17	0.04	0.023
3/8	0.3750	0.551	0.562	0.628	0.650	0.728	0.750	0.330	0.347	0.23	0.04	0.025
7/16	0.4375	0.675	0.688	0.768	0.794	0.910	0.937	0.375	0.395	0.26	0.04	0.032
1/2	0.5000	0.736	0.750	0.840	0.866	1.000	1.031	0.437	0.458	0.31	0.05	0.035
9/16	0.5625	0.861	0.875	0.982	1.010	1.155	1.188	0.483	0.506	0.35	0.05	0.040
5/8	0.6250	0.922	0.938	1.051	1.083	1.248	1.281	0.545	0.569	0.40	0.05	0.044
3/4	0.7500	1.088	1.125	1.240	1.299	1.460	1.500	0.627	0.675	0.46	0.06	0.051
Nuts Hex Flange Weyn
1/4	0.2500	0.428	0.438	0.488	0.505	0.700	0.728	0.281	0.312	0.15	0.04	0.024
5/16	0.3125	0.489	0.500	0.557	0.577	0.790	0.820	0.343	0.375	0.20	0.04	0.028
3/8	0.3750	0.551	0.562	0.628	0.650	0.885	0.915	0.390	0.406	0.24	0.04	0.031
7/16	0.4375	0.675	0.688	0.768	0.794	1.100	1.131	0.437	0.468	0.26	0.04	0.038
1/2	0.5000	0.736	0.750	0.840	0.866	1.175	1.205	0.485	0.515	0.29	0.06	0.041
9/16	0.5625	0.861	0.875	0.982	1.010	1.260	1.300	0.546	0.578	0.37	0.06	0.044
5/8	0.6250	0.922	0.938	1.051	1.083	1.280	1.360	0.600	0.640	0.42	0.06	0.045